+91 88304 06235 +91 88304 06235+91 88884 66968 eklavyainfo@yahoo.com
Made in India Service & calibration
Product Center · Universal Testing Machines

Electronic Universal Testing Machines

Hydraulic UTE series (100–1000 kN)

RockwellBrinellVickersUniversal Testing MachinesAccessories & Software
All17 Hydraulic UTE series (100–1000 kN)5Electro-mechanical TNE series6Torsion testers6

Universal testing machines for tension, compression, bending, transverse and shear tests: hydraulic UTE machines from 100 to 1000 kN with enclosed pressure-transducer load measurement, and servo ball-screw electro-mechanical TNE machines with auto-detected load cells from 100 N to 100 kN. All use the microprocessor M-2301 control panel with graphing, printing, USB and RS232C PC software, and comply with ASTM, ISO and IS standards. Digital torsion testers from 60 to 2000 Nm complete the range.

5 products in total

Hydraulic UTE series (100–1000 kN)

Capacity range: 100 – 1,000 kN
Universal Testing Machines

UTE 10

Electronic Universal Testing Machine, 100 kN

  • TypeHydraulic, electronic universal testing machine
  • Maximum capacity100 kN
  • Measuring range0–100 kN
  • Load resolution (50,000 counts full scale)2 N
UTE 10
Universal Testing Machines

UTE 20

Electronic Universal Testing Machine, 200 kN

  • TypeHydraulic, electronic universal testing machine
  • Maximum capacity200 kN
  • Measuring range0–200 kN
  • Load resolution (50,000 counts full scale)4 N
UTE 20
Universal Testing Machines

UTE 40

Electronic Universal Testing Machine, 400 kN

  • TypeHydraulic, electronic universal testing machine
  • Maximum capacity400 kN
  • Measuring range0–400 kN
  • Load resolution (50,000 counts full scale)8 N
UTE 40
Universal Testing Machines

UTE 60

Electronic Universal Testing Machine, 600 kN

  • TypeHydraulic, electronic universal testing machine
  • Maximum capacity600 kN
  • Measuring range0–600 kN
  • Load resolution (50,000 counts full scale)12 N
UTE 60
Universal Testing Machines

UTE 100

Electronic Universal Testing Machine, 1000 kN

  • TypeHydraulic, electronic universal testing machine
  • Maximum capacity1000 kN
  • Measuring range0–1000 kN
  • Load resolution (50,000 counts full scale)20 N
UTE 100
Background information

Tensile and universal testing

IS 1828 (Part 1) · ASTM E4 · ISO 7500-1 · ASTM E8 · ISO 6892

In a tensile test a specimen of known cross-section and gauge length is gripped at both ends and stretched at a controlled rate until fracture while force and extension are recorded. From the stress–strain curve the yield or proof strength, ultimate tensile strength, elongation and reduction of area are determined as specified in ASTM E8 and ISO 6892. The same machine performs compression, bending, transverse and shear tests with the appropriate fixtures.

The force-measuring system of a universal testing machine is verified against a calibrated proving device to IS 1828 (Part 1), ASTM E4 and ISO 7500-1, and extensometers to ISO 9513 / ASTM E83, so that results are traceable across laboratories.

ETS hydraulic UTE machines cover 100 to 1000 kN with enclosed pressure-transducer load measurement, and the servo ball-screw electro-mechanical TNE machines cover 100 N to 100 kN with auto-detected load cells. All use the M-2301 microprocessor control panel with graphing, printing and PC software. Digital torsion testers to ASTM E143 and IS 1717 complete the range.